TWO:Balmayne relaxed his grip of the old man's throat as the knocking was repeated. Some accident might have happened, but on the other hand it was possible that there was some real and tangible danger here.
当社は、当ウェブサイト上でお客様からご提供された個人情報の適切な保護を重大な責務と認識し、
以下の考え方でお客様の個人情報を取り扱います。
THREE:
- お客様の個人情報の取扱につきましては、関係法令を順守し、従業員および業務委託先に周知徹底し、 継続的な改善に努めます。
- お客様情報の漏えい、滅失、改ざん等の防止その他の安全管理のため、適切な措置を講じます。
- 保有するお客様情報について、お客様本人からの開示、訂正、削除、利用停止、消去のご請求等のお申し出を いただいた際は、誠意をもって対応いたします。(窓口:担当営業または までご連絡ください。)
- 当社の事業、製品、技術、サービスに関わる資料の送付、見積依頼、各種お問い合わせに対する対応の 目的に利用いたします。
- 当社の事業、製品、技術、サービスを改善する目的に利用いたします。
- 上記以外の目的で収集、利用する場合が生じたときには、予めその旨を明示いたします。
当社は、ご提供いただいた個人情報を、次のいずれかに該当する場合を除き、第三者に譲渡?提供 することはありません。
- お客様ご本人の承諾を得た場合
- 法的な手続きに則った要請があった場合
- 機密保持契約を締結した業務委託先等に対し、業務を委託する場合
TWO:Reviewing these mechanical conditions, we may at once see sufficient reasons for the platen movement of planing machines; and that it would be objectionable, if not impossible, to add a traversing or cutting action to tools already supported through the medium of eight joints. To traverse for cutting would require a moving gib joint in place of the bolted one, between the standards and main frame, leading to a complication of joints and movements quite impracticable.
当ウェブサイトのご利用にあたっては、以下の利用条件をよくお読みいただき、これらの条件にご同意されてから、ご利用いただくようお願いいたします。ご同意いただけない場合にはご利用をお控えくださるようお願いいたします。
THREE:Inherent or cooling strains in castings is much more intricate than shrinkage: it is, in fact, one of the most uncertain and obscure matters that pattern-makers and moulders have to contend with. Inherent strains may weaken castings, or cause them to break while cooling, or sometimes even after they are finished; and in many kinds of works such strains must be carefully guarded against, both in the preparation of designs and the arrangement of patterns, especially for wheels and pulleys with spokes, and for struts or braces with both ends fixed. The main difficulty resulting from cooling strains, however, is that of castings being warped and sprung; this difficulty is continually present in the foundry and machine-shop, and there is perhaps no problem in the whole range of mechanical manipulation of which there exists more diversity of opinion and practice than of means to prevent the springing of castings. This being the case, an apprentice can hardly hope for much information here. There is no doubt of springing and strains in castings being the result of constant causes that might be fully understood if it were not for the ever-changing conditions which exist in casting, both as to the form of pieces, the temperature and quality of metal, mode of cooling, and so on.10 John Street, Adelphi,
- 当社は、当ウェブサイトの掲載情報について可能な限りその正確性を保つよう細心の注意を払っておりますが、 これらはいかなる保証をするものではありません。
- 当ウェブサイトに収録されている情報?コンテンツは、予告なく変更、削除されることがあります。
- 当社は当ウェブサイトのご利用に起因するいかなる損害についても一切責任を負いかねます。
- 当ウェブサイトに収録されているコンテンツの著作権は、日本化学機械製造株式会社に帰属しています。
- 法律で認められている範囲を超えて、当ウェブサイト内のコンテンツを著作権者に無断で使用することはできません。
- 当ウェブサイトへのリンクをご希望の場合は、当社までご連絡くださるようお願いいたします。
- 但し、ウェブサイトの内容やリンクの方法によっては、当ウェブサイトへのリンクをお断りする場合があります。
- お問い合わせは、 までお寄せください。
- また、当社より送信するお問い合わせへのご返事等の電子メールは、お客様個人宛にお送りするものであり、 この電子メールに関する著作権は当社に帰属します。
- 当社の許可なくこの電子メールの一部または全体を利用することはご遠慮くださいます様お願いいたします。
TWO:To believe a fact is not to learn it, in the sense that these terms may be applied to mechanical knowledge; to believe a proposition is not to have a conviction of its truth; and what is meant by learning mechanical principles is, as remarked in a previous place, to have them so fixed in the mind that they will involuntarily arise to qualify everything met with that involves mechanical movement. For this reason it has been urged that learners should begin by first acquiring a clear and fixed conception of power, and next of the nature and classification of machines, for without the first he cannot reach the second.